Configures the retransmit time value in router discovery advertisements on the VLAN.
vlan_name | Specifies an IPv6 configured VLAN. |
retransmittime | Specifies the reachable time value in advertisements, in milliseconds. Range is 0 to 4,294,967,295 (approximately 50 days). |
1,000 milliseconds.
This command configures the retransmit time value in the router advertisement messages.
The retransmit time, in milliseconds, is the time between retransmitted neighbor solicitation messages. A value of 0 means the value is unspecified by this router. The maximum value is 4,294,967,295.
The following example configures the retransmit time to be 604,800,000 milliseconds (one week) for the VLAN "top_floor":
configure vlan top_floor router-discovery retransmit-time 604800000
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the Switch Engine v33.1.1 Licensing Guide document.